Rolling Steel Fire Doors (Stay Open and Service)
Jump to: Information | Photos | Customers | Models | Compare Models | Customizations | Warranty
#1 Defence in the Event of a Fire
Our fire-rated rolling steel doors meet all fire safety standards. In the event of a fire, these doors are designed to close to seal off an area to reduce to spread of smoke and fire inside your facility to protect people and the building. Above all, they are designed to save lives.
Information
Made in Canada
These rolling steel fire doors are manufactured locally in Canada and for Canadian conditions.
Durable and Long Lasting
The rugged 2″ slats with a G90 galvanized finish that doesn’t need any further painting, ensures years of trouble-free operation. Moreover the structural angle guides and a bottom bar that are already prime painted for easy maintenance.
In addition, the 1/4″ thick steel plate brackets are more durable than stamped steel bracket plates to prevent the need for future repairs.
Smooth and Quiet
The fluid governor provides a smooth and quiet operation.
Follows Fire Safety Standards
These rolling steel fire doors are available in 3/4, 1 1/2, 3, or 4 hour fire labels.
A Variety of Styles and Sizes to Fit Your Needs
In addition to having door in different fire labels to suit your safety needs, we have fire doors in a variety of sizes and in both stay open and service models.
Book Your Fire Door Drop Test
According to NFPA 80, a fire door needs to be inspected and tested annually. It is the employer’s responsibility to make sure that the facility’s fire doors are in proper operation so that they are prepared in case of an emergency. The best way to do this is with an annual fire door drop test with one of our trained professionals.
Photos
Models
|
Stay Open Rolling Steel Fire DoorAn economical alternative when a fire door is required to close only during testing or in the event of a fire. |
|
Service Rolling Steel Fire DoorUnique 2 spring system allows frequent testing at minimum cost. Available in push up, crank, motor (belt drive), motor (gear head) or chain hoist operation. |
Model Comparison Chart
| Stay Open Fire Door | Service Fire Door | |
| Slats | Rugged 2" curved slats | Rugged 2" curved or flat slats |
| Finish | G90 Galvanized finish that needs no further painting | G90 Galvanized curtain and hood that needs no further painting |
| Application | An economical alternative when a fire door is required to close only during testing or in the event of a fire. | Unique 2 spring system allows frequent testing at minimum cost. |
| Fire Label | 3/4, 1 1/2, 3 or 4 hour fire label | |
| Operation | Stay Open | Push up, crank, motor (belt drive), motor (gear head) or chain hoist. |
Customizations
Stay Open Rolling Steel Fire Door
- Prime painted hood
- Optional solenoid release with 30 sec. time delay or 72HR battery backup
- Smoke detectors and sounder strobes
- Smoke seals
Service Rolling Steel Fire Door
- Push up, crank, motor (belt drive), motor (gear head) or chain hoist
- Solenoid release with 30 sec time delay or 72hr battery back-up.
- Smoke detectors and sounder strobes
- Smoke seals
Warranty
- 1 year limited.